Precautions For The Use And Maintenance Of The Interactive Board All-In-One Machine

With the rapid development of science and technology today, professional multimedia interactive all-in-one machines have been widely used. In schools, multimedia libraries, company conference rooms, and even some basic education, the multimedia interactive all-in-one machine provides great convenience for our work and life but also makes people more and more inseparable from it. The lifespan of the cost-effective multimedia interactive all-in-one machine is not short, but its maintenance is still worthy of our attention. The following introduces the precautions for using the multimedia interactive all-in-one machine.

Attention should be paid to cleaning and scrubbing: every day before starting the machine, wipe the LCD screen of the fuselage with a dry and wet cloth and use glass cleaner to clean the dirty fingerprints and oil stains on the touch screen. Do not use chemicals to wipe the machine to damage its painted surface. If there is dust and dirt, it should be wiped with a clean lint-free cloth dipped in a small amount of professional cleaning solution after ten minutes after turning off the monitor, and then wipe the monitor with a clean lint-free cloth.

Note on touch screen maintenance: The power supply and touch report of the infrared touch screen are input by the USB cable, which is very important for the touch all-in-one machine. It can be said to be the lifeline of touch. If the USB cable is frequently pulled out, the socket will be damaged, and the touch will be completely invalid due to loosening. the problem, so don't unplug the USB cable frequently.

Avoid heavy pressure shocks: Do not apply pressure to the interactive board display surface. The interactive board screen is very delicate and fragile, so avoid strong shock and vibration. The interactive board contains many glasses and sensitive electrical components. Dropping on the floor or other similar strong shocks will cause the interactive board screen and other Damage to some units. When the device fails, don't disassemble it blindly, if you don't know it, it may cause other damage. In case of failure, contact professional and technical maintenance personnel for maintenance in time to prevent unnecessary damage caused by improper handling.

Attention should be paid to switching on and off: Many electronic products do not pay much attention to switching on and off during normal use. The interactive board is one of the electronic products. Even if the machine itself uses industrial control accessories, if the operation is not careful, the service life of the machine will be greatly reduced. When it is necessary to force a shutdown, do not turn it on immediately after the forced shutdown, please ensure a three-minute interval! When the machine is running, the chip is working and the hard disk is reading data. If the power supply is suddenly cut off, it is easy to cause irreparable damage to the hardware.

Note for socket selection: the interactive board has a rated power during operation. If the quality of the power socket selected is not good, the voltage caused by no voltage stabilizer is unstable, or the voltage is too large or too low beyond the floating range of the machine, then the chip of the interactive board will be damaged or stop running. So, please use a relatively high-quality power supply, preferably a separate outlet

The placement should be moisture-proof: the operating environment of the interactive board should be dry. It is necessary to know that electronic products must be kept dry and avoid working in a humid environment! Because the humid environment is easy to cause the equipment to be damp, the components inside the machine are easy to rust, causing the liquid crystal electrode to corrode, affecting the circuit short circuit, use function, and service life. Therefore, the interactive board should be placed in a dry space as much as possible, and it should be avoided operating in an environment with strong light and sunlight. Strong light and sunlight can easily damage the appearance of the machine, and the casing will be aged and damaged, which will seriously damage the external components and affect the visual effect of the screen. If you don't use it for a long time, you must also power on the device regularly for some time and then turn it off. For electronic products, if they are not powered on for a long time, they will be aged or unresponsive.

Avoid light use: the use environment of the smart conference tablet will directly affect the use effect and life of the smart conference tablet. The suitable ambient temperature for the smart conference tablet is OC~50℃ because the general commercial display equipment does not have an outdoor advertising machine. Process and technology, if the sun shines for a long time, it will cause damage to the electronic components of the screen due to excessive temperature.

Do not clean the screen with a wet cloth: It is best not to use a wet cloth when cleaning, because the wet cloth is easy to make the water stay on the screen, and then enter the screen through the edge, resulting in a short circuit of the system.

Do not disassemble without permission: The circuit of the interactive version is complex, and non-professionals should avoid unauthorized disassembly to avoid damage.

Unplug when not in use: If the device is not going to be used for a long time, remember to unplug it. To avoid current breakdown circuits or other electrical hazards.